IntruderLam™

IntruderLam™ is a laminated Grade A safety glass, available in 7.52mm, and provides extra resistance to penetration as its interlayer is four times thicker than normal laminated glass.

  • Security
Features
Safety & Security IntruderLam™ is specifically developed to offer a resilient and long-lasting barrier that resists penetration even upon breakage.
UV Protection IntruderLam™ reduces the rate at which your furniture fades by absorbing 99% of UV radiation.
Enjoy Peace of Mind IntruderLam™ is specifically developed to offer a resilient and enduring barrier for vulnerable entry points.
Product Range
Clear Available Thickness 1 View Product
View Details

* The maximum sheet size is a manufacturing size and may be in excess of the safe glazing sizes set out in Australian standards.
** Image is for visual indication only and colour may vary depending on your screen.

Applications

Internal

  • Doors
  • Shop Front
  • Partitions

External

  • Doors
  • Windows
  • Shop Front
Downloads
Technical Information
Performance Data
Product Name Nominal Thickness Visible Solar UV Trans. U-Value SHGC Shading Co. Weight m²
Trans. Refl. Out Refl. In Trans. Refl.
IntruderLam™ Clear 7.52 87 8 8 69 7 <1 5.6 0.77 0.88 16.6
All performance data is determined using LBL Windows 7.8 software. NFRC 100-2010 conditions have been used.
Product Name Nominal Thickness Visible Solar UV Trans. U-Value SHGC Shading Co. Weight m²
Trans. Refl. Out Refl. In Trans. Refl. Air Argon
IntruderLam™ Clear + QFloat™ Clear 7.52+12+6 77 15 15 55 11 <1 2.6 2.5 0.65 0.75 31.6
IntruderLam™ Clear + EnergyTech™ Clear (#5) 7.52+12+6 71 17 16 48 12 <1 1.8 1.6 0.62 0.71 31.6
All performance data is determined using LBL Windows 7.8 software. NFRC 100-2010 conditions have been used.
Considerations

IGUs
IntruderLam should be incorporated with window frames and locks of sufficient strength.

Installation
Exposed edges should be protected from moisture ingress. To provide a barrier to forced entry IntruderLam must be installed into a full frame without openings.

Glass Processing
Further processing is required for frameless glazing.

How to Specify

Available colours and thicknesses:

  • Clear 7.52mm

Select from: Laminated or Heat Strengthened Laminated

*If unsure, select in compliance with AS1288–2021 or manufacturers recommendation.*

  • The glass shall comply with the following performance criteria:
  • U value
  • Solar Heat Gain Coefficient (SHGC)
  • Visible Light Transmission %
  • Glass Only Values
  • Total window

Heat Strengthening
All glass which requires extra strength and thermal resistance will be heat strengthened. Heat strengthening increases the strength of annealed glass; however, it is not a substitute for toughened glass.

In the event of fracturing heat strengthened glass will crack and tends to remain in glazed position.

All glass is to be selected and installed in accordance but not exclusively with the following Australian and/or New Zealand Standards

  • AS 1288 Glass in Buildings Selection and Installation
  • AS 1170 Minimum Wind Loads on Structures
  • AS/NZ 2208 Safety Glazing Materials in Buildings
  • AS/NZ 4666 Insulating Glass Units
  • AS/NZ 4667 Quality Requirements for cut-to-size and Processed Glass
     

Oceania Glass makes and distributes glass. Oceania Glass does not process glass nor produce Insulated Glass Units. Processing of glass and production of Insulated Glass Units is undertaken by independent processors. Speak with your nominated glass processors to understand their processing capability.